EnGraph Help!

Some of our software uses a Virtual Private Network (VPN).  Sometimes you need to change how this VPN connects to your base network.  To change the IP, follow these steps:

1. On your keyboard, press and hold the Start button then press R
2. On the screen that opens up, type (without quotes) "control.exe"
3. If you are running XP or 2000, double click "Network Connections"
   If you are running Vista, click "Network and Internet", then click "Connect to a Network"
4. Find the VPN connection in the list.  The name will be provided to you by Tim or Kyle
5. Right click the VPN connection and select "Properties"
6. On the "General" tab, replace the text in "Host name or IP address..." with your new IP information.
7. Click "OK"
8. You might get a message that says "Since this connection is currently active...".  Follow the next step of instructions to ensure you are connecting correctly.  Otherwise you are finished with this activity.
   1. Press "OK" on the warning message
   2. Right click the VPN connection and select "Disconnect" (If available, otherwise just skip to the next step)
   3. Right click the VPN connection and select "Connect"